Scratching rollers

Big scratching rollers

Description

The striping roller is usually placed on a cutting machine and its maximum rotational speed is 4000 rpm.

Textures:

  • 2.5 mm striping between lines
  • 5 mm striping between lines

The measurement may vary depending on the hardness of the material to be worked on.

References according to the texturing material:

  • For Marble and Limestone
  • For Granite and Abrasive Stone
Technical data
  • Diameter: 300 mm
  • Connection: 50 mm (other lengths available upon request)
  • Width: 100 mm
  • Two kinds of striping: 2.5 mm and 5 mm
  • Plates can be interchanged eight times. When the tip is worn out, the platelets are rotated.
  • Number of platelets: 40
  • Weight: 17 kg
  • Maximum speed: 4000 rpm
  • Available for marble and granite
VIDEO

Hand-held scratching rollers

Description

Hand-held Scratching Rollers.

The hand-held striping roller is usually placed on a polishing machine and its maximum rotational speed is 4000 rpm.

References according to the texturing material:

  • For Marble and Limestone
  • For Granite and Abrasive Stone
Technical data
  • Diameter 115mm
  • Width: 105 mm
  • Conection M.14 or 5/8″
  • Plates can be interchanged eight times. When the tip is worn out, the platelets are rotated.
  • Number of platelets: 42
  • Total Weight including the machine: 9 kg
  • Maximum speed: 4000 rpm
  • Available for marble and granite
VIDEO